Provides a valid Cisco CCNP Wireless 300-360 exam dumps | 100% Free

Posted on by admin

Allexamalert shares online exam exercise questions all year round! Cisco CCNP Wireless 300-360 exam “Designing Cisco Wireless Enterprise Networks (WIDESIGN)” https://www.leads4pass.com/300-360.html (209 Q&As). Continue to study and we provide an updated cisco 300-360 exam practice questions and answers. You can practice the test online!

Table of Contents:

Latest Cisco CCNP Wireless 300-360 pdf

[PDF] Free Cisco CCNP Wireless 300-360 pdf dumps download from Google Drive: https://drive.google.com/open?id=1xefPYNR7bwOF8GNFdBisfgiH5t6_wNan

300-360 WIDESIGN – Cisco: https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/widesign.html

Cisco CCNP Wireless 300-360 Exam Practice Questions

QUESTION 1
You deploy a wireless network for a common area located outside of a student dorm by using patch antennas. Students
report weak signals in specific locations of the coverage area. Which option is a possible cause of the issue?
A. neighboring buildings
B. vehicles
C. trees
D. Bluetooth interference
Correct Answer: D

 

QUESTION 2
A hospital environment was designed to guarantee RF coverage at or better than -67 dBm in the 5 GHz spectrum.
The customer mandates that RRM be used for DCA and TPC in both bands. After deployment, why do many of the
legacy 802.11b/g devices have difficulty maintaining connectivity?
A. Excessive co-channel interference in the 2.4 GHz band exists.
B. Excessive overlapping channels in the 2.4 GHz band exists.
C. TPC drastically reduces Tx power in the 2.4 GHz band.
D. TCP drastically increases Tx power in the 2.4 GHz band.
Correct Answer: C
5 GHz better then -67 will require many AP. The TPC will reduce the TX power on 2.4 GHz

 

QUESTION 3
An engineer is assigned to provide wireless coverage in a provincial capital building. Due to the age and historic nature
of the building, the ability to run new copper Ethernet cable to desired AP locations is limited. Which requirement should
the engineer specify to overcome this restriction?
A. Deploy access points where the survey indicates and connect them via fiber optic cable, using a mediaadapter, and
locally provide power.
B. Deploy access points to each phone location converting two spare pairs of copper from the phone line toEthernet and
locally provide power.
C. Deploy access point devices where limited cable can be run or exists and connect high-gain antennas andincrease
Tx power to increase cell size.
D. Deploy RAP where limited cable can be run or exists, and extend coverage using MAP.
Correct Answer: D

 

QUESTION 4
A wireless engineer is doing a pre-site survey. Which two attributes must match between the site survey and the
production clients? (Choose two.)
A. AP type
B. radio frequency
C. mobility patterns
D. user
E. exact location
Correct Answer: CD

 

QUESTION 5
Which value does EDRRM AQ threshold Low represent?
A. 20
B. 25
C. 30
D. 35
Correct Answer: D

 

QUESTION 6
The ClO of a company wants to start tracking inventory in the warehouse using RFID tags and their existing wireless
network.
The company hires a wireless engineer to ensure that their existing network can support this new initiative. Which tool in
Cisco Prime can help the wireless engineer?
A. Planning Mode
B. Map Editor
C. Site Survey
D. Location Readiness
Correct Answer: D
Using Chokepoints to Enhance Tag Location Reporting Installation of chokepoints provides enhanced location
information for RFID tags. When an active Cisco- compatible Extensions Version 1-compliant RFID tag enters the range
of a chokepoint, it is stimulated by the chokepoint. The MAC address of this chokepoint is then included in the next
beacon sent by the stimulated tag. All access points that detect this tag beacon then forward the information to the
controller and location appliance.
https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-0/user/guide/pi_ug/wireless-maps.html#91300

 

QUESTION 7
Which three WLC actions are needed to properly enable queuing with TSPEC for voice traffic?(choose three)
A. configure WLAN platinum QoS
B. configure WLAN gold QoS
C. configure DTIM=2
D. configure global 802.11b/g/n/ac,or both,to voice CAC
E. configure WLAN setting to enable WMM.
F. Configure WLAN Aironet information elements to enabled.
Correct Answer: ADE

 

QUESTION 8
Which tool in the cisco prime infrastructure can you use to identify whether an existing network can support RFID tags?
A. Site Survey
B. Planning Mode
C. Location Readiness
D. Voice Readiness
Correct Answer: C

 

QUESTION 9
A customer has deployed an N+N redundant wireless infrastructure. In this deployment, the access points have been
salt and peppered between controllers. What configuration would be necessary to cut down on the use of mobility
tunnels for voice clients?
A. mobility anchor
B. KIS based CAC
C. media session snooping
D. re-anchor roamed voice clients
Correct Answer: D

 

QUESTION 10
A customer has requested site surveys for data, voice, video, and location services for their location. The customer will
be using RFID tags extensively. Which type of site survey should be conducted?
A. data
B. voice
C. video
D. location-based services
E. bridging
F. multi-survey
Correct Answer: D

 

QUESTION 11
You must upgrade a data-based wireless network to support Voice over Wireless. Which RSSI measurement do you
use to redesign the wireless network?
A. -65 dBm
B. -72 dBm
C. -75 dBm
D. -67 dBm
Correct Answer: D

 

QUESTION 12
Which description of Cisco Centralized Key Management is true?
A. By caching their credentials, it helps clients save canning time when looking for a new AP to join.
B. It enable the controller to send directed roam requests to a client in situations when the controller can better service
the client on a different AP than the one to which the client is associated.
C. It allows wireless clients to cache their credentials so that, while they are roaming, they do not need to re-
authenticate to the wireless infrastructure.
D. It allow the wireless infrastructure to cache the credentials, which eliminates the need to conduct a full re-
authentication when roaming.
Correct Answer: D

 

QUESTION 13
A wireless engineer is utilizing the voice readiness tool in Cisco Prime for a customer that wants to deploy Cisco IP
phones. Which dBm range is the network inspected against?
A. -75 to -67 dBm
B. -72 to -65 dBm
C. -85 to -65 dBm
D. -85 to -67 dBm
Correct Answer: D

Watch the Cisco CCNP Wireless 300-360 video tutorial online

We offer more ways to make it easier for everyone to learn, and YouTube is the best tool in the video. Follow channels: https://www.youtube.com/channel/UCXg-xz6fddo6wo1Or9eHdIQ/videos get more useful exam content.

Related 300-360 Popular Exam resources

titlepdf youtube 300-365 WIDEPLOY – Cisco lead4pass Lead4Pass Total Questions
Cisco 300-360 lead4pass 300-360 dumps pdf lead4pass 300-360 youtube 300-360 WIDESIGN – Cisco https://www.leads4pass.com/300-360.html 209 Q&A
Cisco CCNP Wireless lead4pass 300-365 dumps pdf lead4pass 300-365 youtube 300-365 WIDEPLOY – Cisco https://www.leads4pass.com/300-365.html 144 Q&A
lead4pass 300-370 dumps pdf lead4pass 300-370 youtube 300-370 WITSHOOT – Cisco https://www.leads4pass.com/300-370.html 104 Q&A
lead4pass 300-375 dumps pdf 300-375 WISECURE – Cisco https://www.leads4pass.com/300-375.html 125 Q&A

Get Lead4Pass Coupons(12% OFF)

lead4pass coupon

What are the advantages of Lead4pass?

We have a number of Cisco, Cisco, IBM, Cisco and other exam experts. We update exam data throughout the year. Top exam pass rate! We have a large user base. We are an industry leader! Choose Lead4Pass to pass the exam with ease!

why lead4pass
[New Dumps] CompTIA Cloud Essentials CV0-001 Dumps Exam Youtube And Files Update Free Try

Summarize:

The free Cisco CCNP Wireless 300-360 exam dump can help you improve your skills and exam experience! To pass the cisco 300-360 exam at once: https://www.leads4pass.com/300-360.html We make Cisco 300-360 videos and 300-360 pdf for you to learn! I hope you can pass the exam easily.