Lead4Pass is giving candidates 13 latest NS0-184 dumps exam questions for free
The latest updated 13-question NetApp NS0-184 Dumps exam questions are shared for free from the exam2pass IT Certification website.
The exam2pass NS0-184 dumps contain 60 exam questions and answers, candidates can download the complete exam questions and answers by clicking on the link: https://www.exam2pass.com/ns0-184.html, then use the NS0-184 dumps with PDF study documents and VCE exam engine helps you study with ease.
The previously updated NS0-184 PDF study file exam questions can be downloaded for information:
https://drive.google.com/file/d/1iOcCkMm4xmKQbjgu1g4uRbf4YM4COfpu/
Candidates can also read the 13 most recent NS0-184 Dumps exam questions and answers online:
| Number of exam questions | Exam name | From | Release time |
| 13 | NetApp Certified Storage Installation Engineer, ONTAP | exam2pass | Sep 29, 2022 |
NEW QUESTION 1:
Click the Exhibit button.
As shown in the exhibit, you have an 8-node ONTAP 9.7 cluster. You are asked to set up a SnapMirror volume relationship between node-1 and node-8 in the same cluster.
In this scenario, which two network components are used by the SnapMirror volume? (Choose two.)
A. private network
B. cluster LIFs
C. client network
D. management LIFs
Correct Answer: AB
NEW QUESTION 2:
You completed an ONTAP cluster deployment as a reseller engineer. During the knowledge transfer process to the customer, they ask for proof that the array has correct multi-path HA cabling deployed and that the array is error-free.
Which documentation output would you present to the customer to satisfy this requirement?
A. Active IQ Unified Manager output
B. NetAppDocs output
C. Config Advisor output
D. Active IQ OneCollect output
Correct Answer: C
NEW QUESTION 3:
Click the Exhibit button.
You want to add a FAS2750 HA pair to an existing 6-node cluster.
Referring to the exhibit, which action would you perform to begin adding the node?
A. Use the back command to begin the Cluster Setup wizard.
B. Reboot the node and enter maintenance mode and run the Cluster Setup wizard.
C. Use the node setup wizard and select 0a as the management interface.
D. Use the exit or quit commands then run the cluster setup command.
Correct Answer: C
Reference: http://docs.netapp.com/ontap-9/topic/com.netapp.doc.dot-cm-sag/System% 20administration.pdf (35)
NEW QUESTION 4:
Click the Exhibit button.
You are installing a 2-node AFF A400 switchless cluster. You have cabled the management network to the e0M port.
NetApp also recommends cabling to a redundant management network switch.
Referring to the exhibit, to which port should the redundant management network be cabled?
A. 3
B. 2
C. 1
D. 4
Correct Answer: D
NEW QUESTION 5:
One of the nodes in your ONTAP 9.7 cluster has failed and is not coming back online.
Which two methods would you use to connect to the node failing to come back online? (Choose two.)
A. Use the Intelligent Platform Management Interface.
B. Use the Service Processor Interface.
C. Use Secure Shell.
D. Use Telnet.
Correct Answer: BC
NEW QUESTION 6:
You are installing a new ONTAP 9.7 cluster by following the installation and setup poster. You are ready to complete the initial cluster setup. You have connected your laptop to the management switch. However, when browsing the network, you are unable to discover the ONTAP controllers.
Which statement explains this behavior?
A. You do not have network discovery enabled.
B. You do not have a static IP address.
C. You do not have an IPv6 configuration set.
D. You do not have a default gateway set.
Correct Answer: D
NEW QUESTION 7:
While testing a recently installed FAS8700 cluster, a node fails. You now need to replace the impaired node.
In this scenario, which two statements are true? (Choose two.)
A. You must move the boot device from the impaired node to the replacement node.
B. The boot device must remain intact and must not be removed from the impaired node.
C. You can change any drives or disk shelves as part of this replacement procedure.
D. A controller model of the same type must be used to replace the impaired node.
Correct Answer: AD
Reference: https://library.netapp.com/ecm/ecm_download_file/ECMP1147156 (2)
NEW QUESTION 8:
You are installing a new ONTAP 9.7 cluster and attaching the cluster to two separate networks. Your customer has indicated that the same range of client IP addresses is used on both networks and that the networks are never allowed to communicate with each other.
In this scenario, which ONTAP feature must be configured to securely allow all clients to access ONTAP NAS protocols?
A. BGP
B. broadcast domains
C. routing
D. IPspaces
Correct Answer: B
Reference: https://www.netapp.com/media/16885-tr-4182.pdf (9)
NEW QUESTION 9:
Before starting a base installation on an AFF A400, you need to find out the default cluster interconnect ports for the AFF A400 controllers.
In this scenario, which three resources would you use to find this information? (Choose three.)
A. Hardware Universe (HWU)
B. Interoperability Matrix Tool (IMT)
C. hardware installation setup poster
D. AFF FAS Documentation Center
E. Active IQ Unified Manager
Correct Answer: ACD
NEW QUESTION 10:
You want to verify that connections are cables correctly and that those shelf IDs are unique within an HA pair. Which tool would be used to accomplish these tasks?
A. System Diagnostics
B. Cloud Insights
C. Active IQ Config Advisor
D. Active IQ Unified Manager
Correct Answer: A
NEW QUESTION 11:
Which three components are required when setting up a new ONTAP cluster? (Choose three.)
A. password
B. cluster management IP
C. node management IP
D. Advanced Drive Partitioning
E. intercluster IP
Correct Answer: BCE
NEW QUESTION 12:
Click the Exhibit button.
A customer has two Cisco 40GbE data switches. They want to connect the switches to an AFF A400 HA pair. The switches and the AFF A400 are approximately seven meters apart.
Referring to the exhibit, which two supported actions would allow you to accomplish this task? (Choose two.)
A. Relocate the switches or the AFF A400 so that the distance is less than five meters.
B. Install 10-meter NetApp supported copper cables.
C. Change the requirement for Ethernet cables.
D. Change the requirement for optical cables.
Correct Answer: BC
NEW QUESTION 13:
Before installing an 8-node cluster for a customer, you want to validate compatibility with existing hardware.
Which two tools would you use to validate the configuration? (Choose two.)
A. Active IQ Config Advisor
B. Interoperability Matrix Tool
C. Active IQ System Manager
D. Hardware Universe
Correct Answer: AB
…
Click Save if you want to download the latest NS0-184 dumps exam questions and answers above:https://drive.google.com/file/d/1wk-syMhmjhaR__KzxzGN_xTSuvWZ7G2L/
The NetApp NS0-184 certification exam is one of the NetApp NCSIE ONTAP exams and is very popular. Candidates can study some of the exam content through the NS0-184 free exam questions provided by exam2pass.
For candidates to 100% pass the NS0-184 NetApp Certified Storage Installation Engineer, ONTAP certification exam, you are welcome to practice the 60 exam2pass NS0-184 Dumps exam questions: https://www.exam2pass.com/ns0-184.html to help you succeed easily.
