Cisco 300-815 dumps: serves all 300-815 CLACCM exam candidates
The newly updated Cisco 300-815 dumps contain 118 exam questions and answers that candidates can study using the 300-815 dumps PDF and 300-815 dumps VCE to help you successfully pass the 300-815 CLACCM exam.
You are welcome to download the latest Cisco 300-815 dumps: https://www.exam2pass.com/300-815.html, exam2pass 300-815 dumps serve all candidates taking the 300-815 CLACCM exam and guarantee you 100% Successfully passed the 300-815 CLACCM exam.
Download the Cisco 300-815 PDF for free sharing online:
https://drive.google.com/file/d/1jW9EETiUpbWRqfrjNScwp5y7i8c_hiyg/view?usp=sharing
Share the latest Cisco 300-815 dumps exam questions and answers for free
New Question 1:
An administrator is asked to configure egress call routing by applying globalization and localization on Cisco UCM.
How should this be accomplished?
A. Localize the calling and called numbers to E.164 format and globalize the called number in the gateway.
B. Globalize the calling and called numbers to E.164 format and localize the called number in the gateway.
C. Localize the calling and called numbers to PSTN format and globalize the calling and called numbers in the gateway.
D. Globalize the calling and called numbers to PSTN format and localize the calling number in the gateway.
Correct Answer: B
New Question 2:
Refer to the exhibit.
While troubleshooting call failures on the Cisco Unified Border Element, an administrator notices that messages are being sent to the service provider, but there is no response.
The administrator later learns that this SIP provider does not support PRACK.
Which header should be removed from the SIP message to resolve this issue?
A. Require: 100rel
B. Content-Type: application/SDP
C. Contact:
D. Content-Disposition: session;handling=required
Correct Answer: A
New Question 3:
What is the first preference condition matched in a SIP-enabled incoming dial peer?
A. incoming URI
B. target carrier-id
C. answer-address
D. incoming called-number
Correct Answer: A
New Question 4:
An engineer must configure a Cisco UCM hunt list so that calls to users in a line group are routed to the first idle user and then the next.
Which distribution algorithm must be configured to accomplish this task?
A. broadcast
B. top down
C. longest idle time
D. circular
Correct Answer: B
Reference: https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_0_1/ccmcfg/b03lngrp.html
New Question 5:
An engineer must implement call restrictions to toll-free numbers using a class of restrictions in a branch Cisco UCME.
In which two places is the coolest incoming or cor incoming command configured? (Choose two.)
A. “voice register pool ” configuration mode
B. “ephone-dn ” configuration mode
C. “dial-peer cor custom ” configuration mode
D. “voice register global ” configuration mode
E. “telephony-service ” configuration mode
Correct Answer: AB
New Question 6:
What is a description of RTP timestamps or sequence numbers?
A. The sequence number is used to detect losses.
B. Timestamps increase by the time “carrying” by a packet.
C. Sequence numbers increase by four for each RTP packet transmitted.
D. The timestamp is used to place the incoming audio and video packets in the correct timing order (playout delay compensation).
Correct Answer: D
New Question 7:
A customer has multisite deployments with a globalized dial plan. The customer wants to route PSTN calls via the gateway assigned to each site.
Which two actions will fulfill the requirement? (Choose two.)
A. Create one global route list for PSTN calls that points to one global PSTN route group.
B. Create a route group that has all the gateways and associate it with the device pool of every site.
C. Assign one route group as a local route group in the device pool of the corresponding site.
D. Create one route group for each site and one global route list for PSTN calls that point to the local route group.
E. Create a hunt group and assign it to each side route pattern.
Correct Answer: CD
Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/8x/uc8x/dialplan.html
New Question 8:
Refer to the exhibit.
Users report that outbound PSTN calls from phones registered to Cisco UCM are not completed.
The local service provider in North America has a requirement to receive calls in a 10-digit format.
The Cisco UCM sends the calls to the Cisco Unified Border Element router in a globalized E.164 format.
There is an outbound dial peer on Cisco Unified Border Element configured to send the calls to the provider.
The dial-peer has a voice translation profile applied in the correct direction but an incorrect voice translation rule is applied.
Which rule modifies DNIS in the format that the provider is expecting?
A. rule 1 /^+([^1].*)/ /011\1/
B. rule 1/^+1([2-9]..[2-9]……$)/ /\1/
C. rule 1 /^([2-9]..[2-9]……$)/ /\1/
D. rule 1 /^+1([2-9]..[2-9]……$)/ /\0/
Correct Answer: B
New Question 9:
Which two types of distribution algorithms are within a line group? (Choose two.)
A. random
B. circular
C. highest preference
D. top down
E. bottom up
Correct Answer: BD
New Question 10:
What are two configuration features of the Standard Local Route Group deployment? (Choose two.)
A. is associated with the route group
B. is associated only under the route list
C. chooses the route group that is configured under the device pool of the calling-party device
D. chooses the route group that is configured under the device pool of the called-party device
E. is assigned directly to the route pattern
Correct Answer: BC
New Question 11:
What is the relationship between partition, time schedule, and the time period in Time-of-Day routing in Cisco UCM?
A. A partition can have multiple time schedules assigned. A time schedule contains one or more time periods.
B. A partition can have a one-time schedule assigned. A time schedule contains one or more time periods.
C. A partition can have multiple time schedules assigned. A time schedule contains only one time period.
D. A partition can have a one-time schedule assigned. A time schedule contains only one time period.
Correct Answer: A
New Question 12:
Refer to the exhibit.
An administrator is troubleshooting a problem in which some outbound calls from an internal network to the Internet telephony service provider are not getting connected, but some others connect successfully.
The firewall team found that some call attempts on port 5060 came from an unrecognized IP that has not been defined in the firewall rule.
What should the administrator configure in the Cisco Unified Border Element to fix this issue?
A. use of port 5061 for SIP secure
B. access list allowing the firewall IP
C. bind signaling and media to the loopback interface
D. IP prefix-list to filter the unwanted IP address
Correct Answer: C
New Question 13:
Why would RTP traffic that is sent from the originating endpoint fails to be received on the far endpoint?
A. The far-end connection data (c=) in the SDP was overwritten by deep packet inspection in the call signaling path.
B. Cisco UCM invoked media termination point resources.
C. The RTP traffic is arriving beyond the jitter buffer on the receiving end.
D. A firewall in the media path is blocking TCP ports 16384-32768.
Correct Answer: C
…
Download the Cisco 300-815 PDF for free sharing online:
https://drive.google.com/file/d/1jW9EETiUpbWRqfrjNScwp5y7i8c_hiyg/view?usp=sharing
The above is only a part of Cisco 300-815 dumps exam questions and answers, you can use the above exam questions and answers to improve yourself, not only that, we welcome you to download the latest
Cisco 300-815 dumps exam questions: https://www.exam2pass.com/300-815.html (Total Questions: 118 Q&A), help you truly pass the 300-815 CLACCM exam.
More IT certification blogs: [Amazon]awsexamdumps.com, [Oracle]oraclefreedumps.com, [Cisco]ciscofreedumps.com, [Microsoft]examdumpsbase.com, [Citrix]citrixexamdumps.com
[CompTIA]comptiafreedumps.com, [VMware]vmwarefreedumps.com, [IBM]ibmexamdumps.com, [HP]hpexamdumps.com, [NetApp]netappexamdumps.com, [Juniper]juniperexamdumps.com
[Fortinet]fortinetexamdumps.com
